Optical Fiber-Based Needle Shape Sensing in Real Tissue: Single Core vs. Multicore Approaches

TL;DR

This study compares single-core and multicore fiber optic sensors embedded in needles for real-time shape sensing during minimally-invasive surgeries, revealing that single-core sensors outperform multicore in real tissue conditions.

Contribution

The paper provides a direct experimental comparison of single-core and multicore fiber optic sensors in needle shape sensing within phantom and ex-vivo tissues, offering insights for sensor optimization.

Findings

Single-core sensors perform equally well as multicore in phantom tissue.

Single-core sensors significantly outperform multicore in ex-vivo tissue.

The paper introduces an experimental platform for direct sensor comparison.

Abstract

Flexible needle insertion procedures are common for minimally-invasive surgeries for diagnosing and treating prostate cancer. Bevel-tip needles provide physicians the capability to steer the needle during long insertions to avoid vital anatomical structures in the patient and reduce post-operative patient discomfort. To provide needle placement feedback to the physician, sensors are embedded into needles for determining the real-time 3D shape of the needle during operation without needing to visualize the needle intra-operatively. Through expansive research in fiber optics, a plethora of bio-compatible, MRI-compatible, optical shape-sensors have been developed to provide real-time shape feedback, such as single-core and multicore fiber Bragg gratings. In this paper, we directly compare single-core fiber-based and multicore fiber-based needle shape-sensing through identically constructed, four-active area sensorized bevel-tip needles inserted into phantom and \exvivo tissue on the same experimental platform. In this work, we found that for shape-sensing in phantom tissue, the two needles performed identically with a $p$-value of $0.164 > 0.05$, but in \exvivo real tissue, the single-core fiber sensorized needle significantly outperformed the multicore fiber configuration with a $p$-value of $0.0005 < 0.05$. This paper also presents the experimental platform and method for directly comparing these optical shape sensors for the needle shape-sensing task, as well as provides direction, insight and required considerations for future work in constructively optimizing sensorized needles.