Radioactivity in a bucket

TL;DR

This paper demonstrates how Monte Carlo simulations can accurately model gamma-ray detection from extended radioactive sources like potassium chloride, overcoming mathematical complexities in radiation physics experiments.

Contribution

It introduces a method to simulate and analyze gamma-ray detection from large extended sources using Monte Carlo techniques, validated with experimental data.

Findings

Good agreement between measured and simulated activity values.

Monte Carlo simulation effectively models extended source detection.

Method enhances understanding of radiation detection in complex geometries.

Abstract

In Radiation Physics classes, point sources are typically used, for which it is relatively easy to describe the signal obtained by a radiation detector, such as the NaI(Tl) scintillation detector. The use of large extended radiation sources is generally avoided due to the mathematical complexity that their description may involve. However, the use of Monte Carlo simulation methods allows this limitation to be overcome. Potassium chloride, containing the 40K isotope, is an ideal candidate for carrying out this type of experiment. The source activity is obtained through the detection of the 1460.8 keV gamma-photon emitted in the 40K decay. In the first experiment, a cylindrical container is used, placing the NaI(Tl) detector in its center and filling the remaining space with potassium chloride. In a second, more complex case, a large radioactive source consisting of a container filled with a mixture of sand and potassium chloride, with the NaI(Tl) detector placed in the center of the mixture, is used. In this case, the mass of potassium chloride is approximately 1/5 of the sand mass. In both experiments, the detection efficiency is obtained by Monte Carlo simulation. A careful analysis of the experimental data allows to obtain a good agreement between the measured and calculated value of the activity.