Rethinking Ductility -- A Study Into the Size-Affected Fracture of Polymers

TL;DR

This study investigates how size and degree of conversion affect fracture behavior in polymers, revealing a size-induced ductile-to-brittle transition linked to the fracture length scale.

Contribution

It establishes a mechanism explaining size-affected ductility in polymers, highlighting the role of fracture length scale and degree of conversion in failure behavior.

Findings

Higher degree of conversion increases strength and stiffness.

Fracture energy decreases significantly with higher degree of conversion.

Ductile-to-brittle transition occurs when fracture zone size approaches sample width.

Abstract

Ductility quantifies a material's capacity for plastic deformation, and it is a key property for preventing fracture driven failure in engineering parts. While some brittle materials exhibit improved ductility at small scales, the processes underlying this phenomenon are not well understood. This work establishes a mechanism for the origin of ductility via an investigation of size-affected fracture processes and polymer degree of conversion (DC) in two-photon lithography (TPL) fabricated materials. Microscale single edge notch bend ($\mu$SENB) specimens were written with widths from 8 to 26 $\mu$m and with different laser powers and post-write thermal annealing to control the DC between 17\% and 80\%. We find that shifting from low to high DC predictably causes a $\sim$3x and $\sim$4x increase in strength and bending stiffness, respectively, but that there is a corresponding $\sim$6x decrease in fracture energy from 180 $J/m^2$ to 30 $J/m^2$. Notably, this reduced fracture energy is accompanied by a ductile-to-brittle transition (DBT) in the failure behavior. Using finite element analysis, we demonstrate that the DBT occurs when the fracture yielding zone size ($r_p$) approaches the sample width, corresponding with a known fracture size-affected transition from flaw-based to strength-based failure. This finding provides a crucial insight that ductility is a size-induced property that occurs when features are reduced below a characteristic fracture length scale and that strength, stiffness, and toughness alone are insufficient predictors of ductility.