Radar-STDA: A High-Performance Spatial-Temporal Denoising Autoencoder for Interference Mitigation of FMCW Radars

TL;DR

Radar-STDA is a lightweight, high-speed deep learning autoencoder that effectively mitigates interference in millimeter-wave radars by leveraging spatial and temporal information, improving target detection in autonomous systems.

Contribution

We introduce Radar-STDA, a novel efficient denoising autoencoder that incorporates spatial-temporal data for interference mitigation in radar systems, and release the first synthetic radar interference dataset.

Findings

Achieves a maximum SINR of 17.08 dB with 140,000 parameters.

Runs at 207.6 FPS on RTX A4000 GPU.

Operates at 56.8 FPS on NVIDIA Jetson AGXXavier.

Abstract

With its small size, low cost and all-weather operation, millimeter-wave radar can accurately measure the distance, azimuth and radial velocity of a target compared to other traffic sensors. However, in practice, millimeter-wave radars are plagued by various interferences, leading to a drop in target detection accuracy or even failure to detect targets. This is undesirable in autonomous vehicles and traffic surveillance, as it is likely to threaten human life and cause property damage. Therefore, interference mitigation is of great significance for millimeter-wave radar-based target detection. Currently, the development of deep learning is rapid, but existing deep learning-based interference mitigation models still have great limitations in terms of model size and inference speed. For these reasons, we propose Radar-STDA, a Radar-Spatial Temporal Denoising Autoencoder. Radar-STDA is an efficient nano-level denoising autoencoder that takes into account both spatial and temporal information of range-Doppler maps. Among other methods, it achieves a maximum SINR of 17.08 dB with only 140,000 parameters. It obtains 207.6 FPS on an RTX A4000 GPU and 56.8 FPS on an NVIDIA Jetson AGXXavier respectively when denoising range-Doppler maps for three consecutive frames. Moreover, we release a synthetic data set called Ra-inf for the task, which involves 384,769 range-Doppler maps with various clutters from objects of no interest and receiver noise in realistic scenarios. To the best of our knowledge, Ra-inf is the first synthetic dataset of radar interference. To support the community, our research is open-source via the link \url{https://github.com/GuanRunwei/rd_map_temporal_spatial_denoising_autoencoder}.