Robotic surface exploration with vision and tactile sensing for cracks detection and characterisation

TL;DR

This paper introduces a combined vision and tactile sensing algorithm for robotic crack detection and characterization, utilizing fibre-optic sensors, motion planning, and data analysis to improve accuracy and efficiency.

Contribution

The paper presents a novel integrated approach using fibre-optic tactile sensors and vision-based motion planning for accurate crack detection and geometry analysis.

Findings

Enhanced crack detection accuracy with combined vision and tactile data

Effective motion planning reduces exploration cost

Successful classification of crack features and geometry

Abstract

This paper presents a novel algorithm for crack localisation and detection based on visual and tactile analysis via fibre-optics. A finger-shaped sensor based on fibre-optics is employed for the data acquisition to collect data for the analysis and the experiments. To detect the possible locations of cracks a camera is used to scan an environment while running an object detection algorithm. Once the crack is detected, a fully-connected graph is created from a skeletonised version of the crack. A minimum spanning tree is then employed for calculating the shortest path to explore the crack which is then used to develop the motion planner for the robotic manipulator. The motion planner divides the crack into multiple nodes which are then explored individually. Then, the manipulator starts the exploration and performs the tactile data classification to confirm if there is indeed a crack in that location or just a false positive from the vision algorithm. If a crack is detected, also the length, width, orientation and number of branches are calculated. This is repeated until all the nodes of the crack are explored. In order to validate the complete algorithm, various experiments are performed: comparison of exploration of cracks through full scan and motion planning algorithm, implementation of frequency-based features for crack classification and geometry analysis using a combination of vision and tactile data. From the results of the experiments, it is shown that the proposed algorithm is able to detect cracks and improve the results obtained from vision to correctly classify cracks and their geometry with minimal cost thanks to the motion planning algorithm.