Image-based Visual Servo Control for Aerial Manipulation Using a Fully-Actuated UAV

TL;DR

This paper presents a novel image-based visual servo control method for fully-actuated UAVs performing bridge maintenance, enabling motion and force control without external pose estimation or pre-defined visual markers.

Contribution

It introduces a visual servo strategy that combines line detection and hybrid force-motion control, reducing mechanical and control complexity for aerial manipulation tasks.

Findings

Effective motion tracking demonstrated in experiments.

Force holding capability validated during bridge painting.

No reliance on external localization or pre-defined visual markers.

Abstract

Using Unmanned Aerial Vehicles (UAVs) to perform high-altitude manipulation tasks beyond just passive visual application can reduce the time, cost, and risk of human workers. Prior research on aerial manipulation has relied on either ground truth state estimate or GPS/total station with some Simultaneous Localization and Mapping (SLAM) algorithms, which may not be practical for many applications close to infrastructure with degraded GPS signal or featureless environments. Visual servo can avoid the need to estimate robot pose. Existing works on visual servo for aerial manipulation either address solely end-effector position control or rely on precise velocity measurement and pre-defined visual visual marker with known pattern. Furthermore, most of previous work used under-actuated UAVs, resulting in complicated mechanical and hence control design for the end-effector. This paper develops an image-based visual servo control strategy for bridge maintenance using a fully-actuated UAV. The main components are (1) a visual line detection and tracking system, (2) a hybrid impedance force and motion control system. Our approach does not rely on either robot pose/velocity estimation from an external localization system or pre-defined visual markers. The complexity of the mechanical system and controller architecture is also minimized due to the fully-actuated nature. Experiments show that the system can effectively execute motion tracking and force holding using only the visual guidance for the bridge painting. To the best of our knowledge, this is one of the first studies on aerial manipulation using visual servo that is capable of achieving both motion and force control without the need of external pose/velocity information or pre-defined visual guidance.