Direct fabrication of high-quality ring-shaped REBa2Cu3Oy bulk magnets by the Single-Direction Melt Growth (SDMG) method

TL;DR

This paper demonstrates a novel SDMG method for directly fabricating high-quality, uniform ring-shaped REBa2Cu3Oy bulk magnets with high trapped fields, suitable for advanced magnetic applications.

Contribution

The study introduces the SDMG technique for producing uniform, high-performance ring-shaped REBCO bulks with superior trapped fields and superconducting properties.

Findings

Achieved trapped fields over 1.8 T at 77 K in ring bulks.

Produced homogeneous superconducting properties throughout the bulk.

Demonstrated high reproducibility and uniformity of the fabricated bulks.

Abstract

Ring-shaped REBa2Cu3Oy melt-textured bulks have been successfully grown by the Single-Direction Melt Growth (SDMG) method, which enables the direct fabrication of uniform bulks with high reproducibility. Three homogeneous DyBa2Cu3Oy ring-bulks with various sizes were synthesized in this study. All of these bulks exhibited concentrically cone-shaped trapped field distribution on the surface and high trapped field more than 1.8 T at 77 K inside the ring, the highest among bulks of comparable size to date. Furthermore, superconducting properties such as superconducting transitions and critical current densities are highly uniform throughout the bulk, confirming the effectiveness of the SDMG approach. Our findings represent a significant advancement in the direct fabrication of high-quality ring-shaped REBCO bulks suitable for high magnetic field applications, in particular, compact nuclear magnetic resonance systems.