Evaluation of motion comfort using advanced active human body models and efficient simplified models

TL;DR

This paper assesses simplified 3D human body models for evaluating motion comfort in vehicles, demonstrating that linear spring-damper models with PID control effectively replicate human postural responses during vibrations.

Contribution

It develops and validates an efficient simplified seated human body model, comparing its performance to complex models for motion comfort analysis.

Findings

Linear models accurately capture human postural response to vibrations.

Adding PID controllers improves model stability and response.

The simplified model runs faster than real-time, suitable for practical applications.

Abstract

Active muscles are crucial for maintaining postural stability when seated in a moving vehicle. Advanced active 3D non-linear full body models have been developed for impact and comfort simulation, including large numbers of individual muscle elements, and detailed non-linear models of the joint structures. While such models have an apparent potential to provide insight into postural stabilization, they are computationally demanding, making them less practical in particular for driving comfort where long time periods are to be studied. In vibrational comfort and in general biomechanical research, linearized models are effectively used. This paper evaluates the effectiveness of simplified 3D full-body human models to capture comfort provoked by whole-body vibrations. An efficient seated human body model is developed and validated using experimental data. We evaluate the required complexity in terms of joints and degrees of freedom for the spine, and explore how well linear spring-damper models can approximate reflexive postural stabilization. Results indicate that linear stiffness and damping models can well capture the human response. The results are improved by adding proportional integral derivative (PID) and head-in-space (HIS) controllers to maintain the defined initial body posture. The integrator is shown to be essential to prevent drift from the defined posture. The joint angular relative displacement is used as the input reference to each PID controller. With this model, a faster than real-time solution is obtained when used with a simple seat model. The paper also discusses the advantages and disadvantages of various models and provides insight into which models are more appropriate for motion comfort analysis.