Data level and decision level fusion of satellite multi-sensor AOD retrievals for improving PM2.5 estimations, a study on Tehran

TL;DR

This study explores the fusion of satellite AOD products from MODIS and VIIRS sensors using machine learning to enhance PM2.5 estimation accuracy and spatial coverage in Tehran.

Contribution

It introduces a novel fusion approach at data and decision levels for satellite AOD products to improve PM2.5 estimation accuracy.

Findings

Data level fusion improved accuracy metrics (R2=0.64)

Decision level fusion of Deep Blue products achieved higher accuracy (R2=0.81)

Fusion strategies enhance PM2.5 estimation from satellite data

Abstract

One of the techniques for estimating the surface particle concentration with a diameter of fewer than 2.5 micrometers (PM2.5) is using aerosol optical depth (AOD) products. Different AOD products are retrieved from various satellite sensors, like MODIS and VIIRS, by various algorithms, such as Deep Blue and Dark Target. Therefore, they do not have the same accuracy and spatial resolution. Additionally, the weakness of algorithms in AOD retrieval reduces the spatial coverage of products, particularly in cloudy or snowy areas. Consequently, for the first time, the present study investigated the possibility of fusing AOD products from observations of MODIS and VIIRS sensors retrieved by Deep Blue and Dark Target algorithms to estimate PM2.5 more accurately. For this purpose, AOD products were fused by machine learning algorithms using different fusion strategies at two levels: the data level and the decision level. First, the performance of various machine learning algorithms for estimating PM2.5 using AOD data was evaluated. After that, the XGBoost algorithm was selected as the base model for the proposed fusion strategies. Then, AOD products were fused. The fusion results showed that the estimated PM2.5 accuracy at the data level in all three metrics, RMSE, MAE, and R2, was improved (R2=0.64). Despite the simplicity and lower computational cost of the data level fusion method, the spatial coverage did not improve considerably due to eliminating poor quality data through the fusion process. Afterward, the fusion of products at the decision level was followed in eleven scenarios. In this way, the best result was obtained by fusing Deep Blue products of MODIS and VIIRS sensors (R2=0.81)