Learning to Predict Grip Quality from Simulation: Establishing a Digital Twin to Generate Simulated Data for a Grip Stability Metric

TL;DR

This paper develops a digital twin simulation to generate synthetic tactile data for training an AI model that predicts grip stability and slip force, enhancing robotic manipulation in industrial assembly.

Contribution

The paper introduces a digital twin for simulating tactile sensor data, enabling efficient training of grip stability prediction models without extensive real-world experiments.

Findings

Simulated RGB contact images closely match experimental data.

Synthetic data accurately reproduces maximum pull forces across object classes.

The digital twin accelerates data generation for grip stability prediction.

Abstract

A robust grip is key to successful manipulation and joining of work pieces involved in any industrial assembly process. Stability of a grip depends on geometric and physical properties of the object as well as the gripper itself. Current state-of-the-art algorithms can usually predict if a grip would fail. However, they are not able to predict the force at which the gripped object starts to slip, which is critical as the object might be subjected to external forces, e.g. when joining it with another object. This research project aims to develop a AI-based approach for a grip metric based on tactile sensor data capturing the physical interactions between gripper and object. Thus, the maximum force that can be applied to the object before it begins to slip should be predicted before manipulating the object. The RGB image of the contact surface between the object and gripper jaws obtained from GelSight tactile sensors during the initial phase of the grip should serve as a training input for the grip metric. To generate such a data set, a pull experiment is designed using a UR 5 robot. Performing these experiments in real life to populate the data set is time consuming since different object classes, geometries, material properties and surface textures need to be considered to enhance the robustness of the prediction algorithm. Hence, a simulation model of the experimental setup has been developed to both speed up and automate the data generation process. In this paper, the design of this digital twin and the accuracy of the synthetic data are presented. State-of-the-art image comparison algorithms show that the simulated RGB images of the contact surface match the experimental data. In addition, the maximum pull forces can be reproduced for different object classes and grip scenarios. As a result, the synthetically generated data can be further used to train the neural grip metric network.