Numerical investigation of airborne transmission in low-ceiling rooms under displacement ventilation

TL;DR

This study uses CFD simulations to analyze airborne COVID-19 transmission in low-ceiling rooms under displacement ventilation, highlighting the impact of thermal stratification and proposing thermal control strategies to mitigate infection risk.

Contribution

It introduces a CFD-based analysis of airborne transmission in low-ceiling rooms and proposes a ventilation thermal control strategy to reduce infection risk.

Findings

Higher ventilation rates improve particle removal efficiency but plateau at a critical point.

Thermal stratification influences the effectiveness of ventilation in removing airborne particles.

Infector location affects critical ventilation rate and infection risk, with corners posing higher risks.

Abstract

This study employs computational fluid dynamics (CFD) simulations to evaluate the risk of airborne transmission of COVID-19 in low-ceiling rooms, such as elevator cabins, under mechanical displacement ventilation. The simulations take into account the effects of the human body's thermal environment and respiratory jet dynamics on the transmission of pathogens. The results of the study are used to propose a potential mitigation strategy based on ventilation thermal control to reduce the risk of airborne transmission in these types of enclosed indoor spaces. Our findings demonstrate that as the ventilation rate (Qv) increases, the efficiency of removing airborne particles (Ep) initially increases rapidly, reaches a plateau (Ep,c) at a critical ventilation rate (Qc), and subsequently increases at a slower rate beyond Qc. The Qc for low-ceiling rooms is lower compared to high-ceiling rooms due to the increased interaction between the thermal plume generated by the occupants or infectors and the ventilation. Further analysis of the flow and temperature fields reveals that Ep is closely linked to the thermal stratification fields, as characterized by the thermal interface height, the height of the temperature isosurface, and temperature gradient. The simulations also indicate that the location of infector relative to ventilation inlet/outlet affects Qc and Ep,c with higher Qc and lower Ep,c observed when infector is in a corner due to potential formation of a local hot spot of high infection risk when infector is near the ventilation inlet. In conclusion, based on the simulations, we propose a ventilation thermal control strategy, by increasing the ventilation temperature, to reduce the risk of airborne transmission in low-ceiling rooms. Our findings indicate that the thermal environment plays a critical role in the transmission of airborne diseases confined spaces.