Utilising nanosecond sources in diffuse optical tomography

TL;DR

This study explores the feasibility of using nanosecond laser pulses in diffuse optical tomography, demonstrating that they can effectively capture imaging data despite pulse variations, enabling simpler and more robust measurement setups.

Contribution

The paper introduces a novel application of nanosecond laser sources in time-domain DOT, showing their viability through simulations and experimental validation, which simplifies system design.

Findings

Nanosecond pulses carry low-frequency information suitable for DOT.

Standard digital oscilloscopes can sufficiently sample TPSF data.

Nanosecond laser pulse variations do not significantly impair image quality.

Abstract

Diffuse optical tomography (DOT) use near-infrared light for imaging optical properties of biological tissues. Time-domain DOT systems use pulsed lasers and measure time-varying temporal point spread function (TPSF), carrying information from both superficial and deep layers of imaged target. In this work, feasibility of nanosecond scale light pulses as sources for time-domain DOT is studied. Nanosecond sources enable using relatively robust measurement setups with standard analog-to-digital converter waveform digitizers, such as digital oscilloscopes. However, this type of systems have variations in source pulses and limited temporal sampling, that could limit their usage. In this work, these different aspects and possible limitations were studied with simulations and experiments. Simulations showed that information carried by time-domain data of diffuse medium is on low frequencies. This enables usage of relatively slow response time measurement electronics, and image processing using Fourier-transformed time-domain data. Furthermore, the temporal sampling in measurements needs to be high enough to capture the TPSF, but this rate can be achieved with standard digital oscilloscopes. It was shown that, although variations in light pulses of nanosecond lasers are larger than those of picosecond sources, they do not affect significantly on image quality. In this work, a prototype time-domain DOT experimental system utilising a high-energy nanosecond laser was constructed. The system consisted of a nanosecond Nd-YAG laser combined with optical parametric oscillator for light input, and avalanche photodetector and high-bandwidth oscilloscope for TPSF measurements. The system was used in both absolute and difference imaging of two phantoms. The experiments verified that both absorbing and scattering objects can be reconstructed with time-domain DOT using a nanosecond laser.