Simultaneous mapping of temperature and hydration in proton exchange membrane of fuel cells using magnetic resonance imaging

TL;DR

This study demonstrates a non-invasive MRI technique to simultaneously map temperature and hydration in proton exchange membranes of fuel cells, overcoming limitations of previous methods by using chemical shift and diffusion imaging.

Contribution

The paper introduces a novel MRI-based method combining chemical shift imaging and diffusion measurements to separately map hydration and temperature in PEMs.

Findings

Successful 16x16 pixel mapping with 1 mm resolution

Achieved 3-minute scan time for real-time monitoring

Hydration uncertainty within 15% and temperature resolution of 6 K

Abstract

The efficiency of a proton exchange membrane (PEM) fuel cell depends on the mobility of protons in the PEM, which is determined by the hydration and temperature of the membrane. While optical techniques or neutron or x-ray scattering techniques may be used to study the inhomogeneities in hydration and temperature in PEMs, these techniques cannot provide 3 dimensional spatial resolution in measuring layered PEMs. Due to their ability to provide non-invasive 3D images, spin-lattice relaxation time (T1) and spin-spin relaxation time (T2) contrast magnetic resonance imaging (MRI) of protons in PEMs have been suggested as methods to map hydration in the fuel cells. We show that while T1 and T2 imaging may be used to map hydration in PEMs under isothermal conditions, proton T1 and T2 are also a function of temperature. For PEM fuel cells, where current densities are large and thermal gradients are expected, T1 and T2 relaxation times cannot be used for mapping hydration. The chemical shift of the mobile proton is, however, a strong function of hydration but not temperature. Therefore, chemical shift imaging (CSI) can be used to map hydration. The diffusion constant of the mobile proton, which can be determined by pulsed field gradient NMR, increases with both temperature and hydration. Therefore, CSI followed by imaging of diffusion via pulsed field gradients can be used for separate mappings of hydration and temperature in PEMs. Here, we demonstrate a 16 x 16 pixel MRI mapping of hydration and temperature in Nafion PEMs with a spatial resolution of 1 mm x 1 mm, a total scan time of 3 minutes, a temperature resolution of 6 K, and an uncertainty in hydration within 15%. The demonstrated mapping can be generalized for imaging exchange membranes of any fuel cells or flow batteries.