Outan: An On-Head System for Driving micro-LED Arrays Implanted in Freely Moving Mice

TL;DR

Outan is a lightweight, high-resolution, multi-channel micro-LED stimulation system integrated into a headstage for freely moving mice, enabling precise neural activity control with a compact design.

Contribution

We developed a miniaturized, high-resolution current source chip integrated into a headstage for multi-channel micro-LED stimulation in freely moving animals.

Findings

System provides 10-bit resolution control for 32 channels

Capable of driving micro-LEDs with up to 4.6 V and 0.9 mA at 5 kHz

Enables complex stimulation patterns in freely moving mice

Abstract

In the intact brain, neural activity can be recorded using sensing electrodes and manipulated using light stimulation. Silicon probes with integrated electrodes and micro-LEDs enable the detection and control of neural activity using a single implanted device. Miniaturized solutions for recordings from small freely moving animals are commercially available, but stimulation is driven by large, stationary current sources. We designed and fabricated a current source chip and integrated it into a headstage PCB that weighs 1.37 g. The proposed system provides 10-bit resolution current control for 32 channels, driving micro-LEDs with up to 4.6 V and sourcing up to 0.9 mA at a refresh rate of 5 kHz per channel. When calibrated against a micro-LED probe, the system allows linear control of light output power, up to 10 micro-W per micro-LED. To demonstrate the capabilities of the system, synthetic sequences of neural spiking activity were produced by driving multiple micro-LEDs implanted in the hippocampal CA1 area of a freely moving mouse. The high spatial, temporal, and amplitude resolution of the system provides a rich variety of stimulation patterns. Combined with commercially available sampling headstages, the system provides an easy to use back-end, fully utilizing the bi-directional potential of integrated opto-electronic arrays.