Photoelectrochemical water splitting with ITO/WO3/BiVO4/CoPi multishell nanotubes fabricated by soft-templating in vacuum

TL;DR

This paper introduces a scalable soft-template method to fabricate multishell nanotube photoelectrodes with enhanced efficiency for water splitting, combining ITO, WO3, BiVO4, and CoPi layers, outperforming traditional planar electrodes.

Contribution

The study presents a novel, scalable fabrication process for multishell nanotube electrodes with significantly improved PEC water splitting performance.

Findings

NT electrodes show over tenfold higher efficiency than planar counterparts.

Electrochemical analysis highlights the importance of the WO3/BiVO4 heterojunction.

Maximized oxygen evolution with CoPi catalyst under standard illumination.

Abstract

A well-established procedure for the photoelectrochemical (PEC) splitting of water relies on using porous electrodes of WO3 sensitized with BiVO4 as a visible scavenger photoanode semiconductor. In this work, we propose an evolved photoelectrode fabricated by a soft-template approach consisting of supported multishell nanotubes (NTs). These NTs are formed by a concentric layered structure of indium tin oxide (ITO), WO3, and BiVO4, together with a final film of cobalt phosphate (CoPi) co-catalyst. Photoelectrode manufacturing is easily implemented at large scale and combines thermal evaporation of single crystalline organic nanowires (ONWs), magnetron sputtering (for ITO and WO3), solution dripping, and electrochemical deposition processes (for BiVO4 and CoPi, respectively) plus annealing under mild conditions. The obtained NT electrodes depict a large electrochemically active surface and outperform by more than one order of magnitude the efficiency of equivalent planar-layered electrodes. A thorough electrochemical analysis of the electrodes under blue and solar light illumination demonstrates the critical role of the WO3/BiVO4 Schottky barrier heterojunction in the control of the NT electrode efficiency and its dependence on the BiVO4 outer layer thickness. Oxygen evolution reaction (OER) performance was maximized with the CoPi electrocatalyst, rendering high photocurrents under one sun illumination. The reported results demonstrate the potential of the soft-template methodology for the large area fabrication of highly efficient multishell ITO/WO3/BiVO4/CoPi NT electrodes, or other alternative combinations, for the photoelectrochemical splitting of water.