Cavity-dumping using a microscopic Fano laser

TL;DR

This paper reports the first realization of a microscopic cavity-dumped laser using Fano resonance, achieving ultrashort pulses with significantly higher peak power, advancing on-chip photonic technology.

Contribution

It introduces a novel microscopic cavity-dumped laser based on Fano resonance, overcoming miniaturization challenges and enabling high peak power ultrashort pulses.

Findings

Achieved ultrashort, high-peak-power pulses in a microscopic laser.

Demonstrated cavity dumping as an effective modulation scheme at microscopic scale.

Paved the way for low-power, chip-scale photonic applications.

Abstract

A microlaser with low energy consumption and high speed is crucial for on-chip photonic networks. Presently, the modulation of microlasers is based on modulating the gain of the laser, which implies a trade-off between the output peak power and the modulation energy. Besides, the temporal width of the output pulse is restricted by the carrier relaxation time. These limitations can be overcome by modulating, instead, the loss of the laser by the scheme of cavity dumping, which is ideal for intense and ultrashort pulse extraction. However, the miniaturization of cavity-dumped lasers has been a long-standing challenge, and no microscopic cavity-dumped lasers were yet realized. Here we demonstrate an ultra-small cavity-dumped microscopic laser based on an optical Fano resonance, which generates optical pulses with peak power more than one order of magnitude higher than the corresponding conventional gain-modulated laser. This demonstration paves the way for realizing microscopic lasers for low-power chip-scale applications.