The anisotropic grain size effect on the mechanical response of polycrystals: The role of columnar grain morphology in additively manufactured metals

TL;DR

This study introduces axial grain size and anisotropy descriptors to analyze how complex, columnar grain morphologies in additively manufactured metals influence their anisotropic mechanical response, revealing an inverse square relation.

Contribution

It presents novel morphological descriptors and a modeling approach to quantify the impact of anisotropic grain size on mechanical anisotropy in AM metals.

Findings

Grain size anisotropy significantly affects mechanical response.

An inverse square relation describes the contribution of anisotropic grain size.

The descriptors effectively represent complex AM microstructures.

Abstract

Additively manufactured (AM) metals exhibit highly complex microstructures, particularly with respect to grain morphology which typically features heterogeneous grain size distribution, anomalous and anisotropic grain shapes, and the so-called columnar grains. In general, the conventional morphological descriptors are not suitable to represent complex and anisotropic grain morphology of AM microstructures. The principal aspect of microstructural grain morphology is the state of grain boundary spacing or grain size whose effect on the mechanical response is known to be crucial. In this paper, we formally introduce the notions of axial grain size and grain size anisotropy as robust morphological descriptors which can concisely represent highly complex grain morphologies. We instantiated a discrete sample of polycrystalline aggregate as a representative volume element (RVE) which has random crystallographic orientation and misorientation distributions. However, the instantiated RVE incorporates the typical morphological features of AM microstructures including distinctive grain size heterogeneity and anisotropic grain size owing to its pronounced columnar grain morphology. We ensured that any anisotropy arising in the macroscopic mechanical response of the instantiated sample is mainly associated with its underlying anisotropic grain size. The RVE was then used for meso-scale full-field crystal plasticity simulations corresponding to uniaxial tensile deformation along different axes via a spectral solver and a physics-based crystal plasticity constitutive model. Through the numerical analyses, we were able to isolate the contribution of anisotropic grain size to the anisotropy in the mechanical response of polycrystalline aggregates, particularly those with the characteristic complex grain morphology of AM metals. Such a contribution can be described by an inverse square relation.