System Integration of ATLAS ITK Pixel DCS ASICs
A. Qamesh, R. Ahmad, D. Ecker, T. Fischer, M. Karagounis, P. Kind, S., Kersten, T. Krawutschke, L. Schreiter, C. Zeitnitz (on behalf of ATLAS ITK, collaboration)
TL;DR
This paper discusses the integration of hardware and firmware components for the ATLAS ITK pixel detector's monitoring system, focusing on the MOPS-HUB interface and its role in data aggregation during the detector upgrade.
Contribution
It introduces the hardware design, firmware specifications, and integration plan for the MOPS-HUB interface in the ATLAS ITK pixel detector system.
Findings
Design of MOPS-HUB hardware components
Firmware specifications for FPGA implementation
Integration plan for detector upgrade
Abstract
During the ATLAS phase II upgrade, the tracking system of the ATLAS experiment will be replaced by an all-silicon detector called the inner tracker (ITK) with a pixel detector as the most inner part. The monitoring data of the new system will be aggregated from an on-detector ASIC called Monitoring Of Pixel System (MOPS) and sent to the Detector Control System(DCS) using a new interface called MOPS-HUB. The hardware components of the MOPS-HUB, firmware specifications for the FPGA of MOPS-HUB and its integration plan will be presented. In addition, an irradiation plan for the new system will be introduced.
Peer Reviews
No public reviews on file for this paper yet. If you reviewed it on a platform where reviews are public (OpenReview, ICLR, NeurIPS, ICML), you can paste yours below so the community can read it here.
Videos
No videos yet. Explain this paper in a talk, walkthrough, or lecture? Add one.
Taxonomy
TopicsParticle Detector Development and Performance · Radiation Detection and Scintillator Technologies · CCD and CMOS Imaging Sensors