Conventional Half-Heusler Alloys Advance State-of-the-Art Thermoelectric Properties

TL;DR

This paper demonstrates that traditional alloying of conventional HfZr-based Half-Heusler alloys can significantly enhance thermoelectric performance, achieving a ZT near 1.5 through doping and microstructural control, offering a simple route to high-efficiency thermoelectric materials.

Contribution

It reveals that conventional alloying techniques can produce high ZT in standard Half-Heusler alloys, challenging the notion that complex nanostructuring is necessary for high thermoelectric performance.

Findings

Achieved ZT ~1.5 at 980 K in Hf0.3Zr0.7CoSn0.3Sb0.7 with minimal Al doping.

Enhanced power factor by approximately 65%.

Reduced thermal conductivity by about 13%.

Abstract

Half-Heusler (HH) phases have garnered much attention as thermally stable and non-toxic thermoelectric materials for power conversion. The most studied alloys to date utilize Hf, Zr, and Ti as the base components. These alloys can achieve a moderate dimensionless figure of merit, ZT, near 1. Recent studies have advanced the thermoelectric performance of HH alloys by employing nanostructures and novel compositions to achieve larger ZT, reaching as high as 1.5. Herein, we report that traditional alloying techniques applied to the conventional HfZr-based half-Heusler alloys can also lead to exceptional ZT. Specifically, we present the well-studied p-type Hf0.3Zr0.7CoSn0.3Sb0.7, previously reported to have a ZT~0.8, resonantly doped with less than 1 at. % metallic Al on the Sn/Sb site, touting a remarkable ZT near 1.5 at 980 K. This is achieved through a significant increase in power factor, by ~65%, and a notable but smaller decrease in thermal conductivity, by ~13%, at high temperatures. These favorable thermoelectric properties are discussed in terms of a local anomaly in the density of states near the Fermi energy designed to enhance the Seebeck coefficient, as revealed by first-principles calculations, as well as the emergence of a highly heterogeneous grain structure that can scatter phonons across different length scales, effectively suppressing the thermal conductivity. Consequently, the effective mass is significantly enhanced from ~ 7 to 10me within a single parabolic band model, consistent with the result from first-principles calculations. The discovery of high ZT in a commonly studied half-Heusler alloy through a conventional and non-complex approach opens a new path for further discoveries in similar types of alloys. Furthermore, it is reasonable to believe that the study will reinvigorate effort in exploring high thermoelectric performance in conventional alloy systems.