Development of a hardware-In-the-Loop (HIL) testbed for cyber-physical security in smart buildings

TL;DR

This paper presents a Hardware-in-the-Loop testbed for evaluating cyber-physical security in smart building HVAC systems, enabling realistic attack and fault testing to improve security measures.

Contribution

It introduces a comprehensive HIL testbed combining real-time simulation, actual HVAC controllers, and remote access for security testing of smart building BAS.

Findings

Supports attack and fault injection experiments

Provides realistic test data for security assessment

Enables remote access and control of HVAC systems

Abstract

As smart buildings move towards open communication technologies, providing access to the Building Automation System (BAS) through the intranet, or even remotely through the Internet, has become a common practice. However, BAS was historically developed as a closed environment and designed with limited cyber-security considerations. Thus, smart buildings are vulnerable to cyber-attacks with the increased accessibility. This study introduces the development and capability of a Hardware-in-the-Loop (HIL) testbed for testing and evaluating the cyber-physical security of typical BASs in smart buildings. The testbed consists of three subsystems: (1) a real-time HIL emulator simulating the behavior of a virtual building as well as the Heating, Ventilation, and Air Conditioning (HVAC) equipment via a dynamic simulation in Modelica; (2) a set of real HVAC controllers monitoring the virtual building operation and providing local control signals to control HVAC equipment in the HIL emulator; and (3) a BAS server along with a web-based service for users to fully access the schedule, setpoints, trends, alarms, and other control functions of the HVAC controllers remotely through the BACnet network. The server generates rule-based setpoints to local HVAC controllers. Based on these three subsystems, the HIL testbed supports attack/fault-free and attack/fault-injection experiments at various levels of the building system. The resulting test data can be used to inform the building community and support the cyber-physical security technology transfer to the building industry.