Discrete Optimal Designs for Distributed Energy Systems with Nonconvex Multiphase Optimal Power Flow

TL;DR

This paper introduces a novel optimization framework for designing distributed energy systems that considers discrete technology choices and multiphase power flow constraints, improving solution feasibility and computational efficiency.

Contribution

It presents the first optimization method integrating discrete technology sizing with multiphase optimal power flow in low-voltage networks, using a decomposition algorithm and heuristic enhancements.

Findings

The proposed algorithms outperform existing solvers, solving cases where others fail.

Including air source heat pumps increases renewable capacity by up to 16%.

Heuristic modifications reduce computation time by up to 70%.

Abstract

The optimal selection, sizing, and location of small-scale technologies within a grid-connected distributed energy system (DES) can contribute to reducing carbon emissions, consumer costs, and network imbalances. This is the first study to present an optimisation framework for obtaining discrete technology sizing and selection for grid-connected DES design, while simultaneously considering multiphase optimal power flow (MOPF) constraints to accurately represent unbalanced low-voltage distribution networks. An algorithm is developed to solve the resulting Mixed-Integer Nonlinear Programming (MINLP) formulation. It employs a decomposition based on Mixed-Integer Linear Programming (MILP) and Nonlinear Programming (NLP), and utilises integer cuts and complementarity reformulations to obtain discrete designs that are also feasible with respect to the network constraints. A heuristic modification to the original algorithm is also proposed to improve computational speed. Improved formulations for selecting feasible combinations of air source heat pumps (ASHPs) and hot water storage tanks are also presented. The algorithms outperform the existing state-of-the-art commercial MINLP solver, which fails to find any solutions in two instances. While feasible solutions were obtained for all cases, convergence was not achieved for all, especially for those involving the larger network. Where converged, the algorithm with the heuristic modification has achieved results up to 70% faster than the original algorithm. Results for case studies suggest that including ASHPs can support up to 16% higher renewable generation capacity compared to gas boilers, albeit with higher ASHP investment costs. The optimisation framework and results can be used to inform stakeholders such as policy-makers and network operators, to increase renewable energy capacity and aid the decarbonisation of domestic heating systems.