Characterization of 250 MeV protons from Varian ProBeam pencil beam scanning system for FLASH radiation therapy

TL;DR

This study characterizes 250 MeV protons from a Varian ProBeam system for FLASH radiation therapy, evaluating beam parameters, dose rate capabilities, and the clinical monitoring ionization chamber's performance for high-dose-rate treatments.

Contribution

It provides detailed characterization of 250 MeV protons for FLASH RT and assesses the clinical ionization chamber's suitability for monitoring ultra-high dose rates.

Findings

Achieved FLASH dose rate (>40 Gy/s) with 250 MeV protons.

Determined maximum field size for FLASH dose rate as 35x35 mm².

Found dose rate depends on beam current, spot spacing, and arrangement.

Abstract

Recently, shoot-through proton FLASH has been proposed where the highest energy is extracted from the cyclotron to maximize the dose rate (DR). Even though our proton pencil beam scanning system can deliver 250 MeV (the highest energy), it is not typical to use 250 MeV protons for routine clinical treatments and as such 250 MeV may not have been characterized in the commissioning. In this study, we aim to characterize 250 MeV protons from Varian ProBeam system for FLASH RT as well as assess the ability of clinical monitoring ionization chamber (MIC) for FLASH-readiness. We measured data needed for beam commissioning: integral depth dose (IDD) curve, spot sigma, and absolute dose calibration. To evaluate MIC, we measured output as a function of beam current. To characterize a 250 MeV FLASH beam, we measured: (1) central axis DR as a function of current and spot spacing and arrangement, (2) for a fixed spot spacing, the maximum field size that still achieves FLASH DR (i.e., > 40 Gy/s), (3) DR reproducibility. All FLASH DR measurements were performed using ion chamber for the absolute dose and irradiation times were obtained from log files. We verified dose measurements using EBT-XD films and irradiation times using a fast, pixelated spectral detector. R90 and R80 from IDD were 37.58 and 37.69 cm, and spot sigma at isocenter were {\sigma}x=3.336 and {\sigma}y=3.332 mm, respectively. The absolute dose output was measured as 0.377 GyE*mm2/MU for the commissioning conditions. Output was stable for beam currents up to 15 nA, and it gradually increased to 12-fold for 115 nA. DR depended on beam current, spot spacing and arrangement and could be reproduced within 4.2% variations. Even though FLASH was achieved and the largest field size that delivers FLASH DR was determined as 35x35 mm2, current MIC has DR dependence and users should measure DR each time for their FLASH applications.