A comparative study of auxiliary intercalating agents on thermal conductivity of expanded graphite/polyetherimide composite

TL;DR

This study demonstrates that using hydrogen peroxide as an auxiliary intercalating agent significantly enhances the thermal conductivity of expanded graphite/polyetherimide composites by creating an interconnected graphene network, achieving a 4030% increase.

Contribution

It is the first comprehensive comparison of auxiliary intercalating agents' effects on thermal conductivity in expanded graphite/polymer composites, highlighting hydrogen peroxide's effectiveness.

Findings

Hydrogen peroxide leads to a 4030% increase in thermal conductivity.

NaClO3 results in a 2190% increase, less effective than H2O2.

H2O2 preserves graphene's in-plane thermal conductivity (~2000 W/m·K).

Abstract

In this work, we have comprehensively studied the effect of auxiliary intercalating agents on the thermal conductivity of expanded graphite (EG) polymer composites. We report an ultra-high enhancement of 4030% in thermal conductivity of polyetherimide/graphene nanocomposite (k = 9.5 Wm-1K-1) prepared through the use of EG with hydrogen peroxide (H2O2) as an auxiliary intercalating agent at 10 wt% compositions (k of pure polyetherimide ~ 0.23 Wm-1K-1). This ultra-high thermal conductivity value is found to be due to an EG-mediated interconnected graphene network throughout the composite, establishing a percolative environment that enables highly efficient thermal transport in the composite. Comparative studies were also performed using sodium chlorate (NaClO3) as an auxiliary intercalating agent. At 10 wt% composition, NaClO3 intercalated EG was found to lead to a smaller enhancement of 2190% in k of composite. Detailed characterization performed to elucidate this advantage, revealed that hydrogen peroxide led to primarily edge oxidation of graphene sheets within EG, leaving the basal plane intact, thus preserving the ultra-high in-plane thermal conductivity of ~ 2000 Wm-1K-1. Sodium chlorate, on the other hand, led to a higher degree of oxidation, with a large number of oxygen groups on the basal plane of graphene, dramatically lowering its in-plane thermal conductivity. Thermal diffusivity of H2O2 prepared EG paper was measured to be 9.5 mm2/s while that of NaClO3 case was measured to be 6.7 mm2/s, thus directly confirming the beneficial impact of H2O2 on k of graphene itself. This study is the first to address the role of intercalating agents on k of expanded graphite/polymer composites and has led to the discovery of H2O2 as an effective intercalating agent for achieving ultra-high thermal conductivity values.