Kerr optical parametric oscillation in a photonic crystal microring for accessing the infrared
Xiyuan Lu, Ashish Chanana, Feng Zhou, Marcelo Davanco, and Kartik, Srinivasan

TL;DR
This paper demonstrates a silicon nitride photonic crystal microring that enables mid-infrared optical parametric oscillation, overcoming fabrication sensitivity and nonlinear process competition issues in integrated photonics.
Contribution
It introduces a novel PhCR design that facilitates infrared OPO by leveraging bandgap-induced frequency shifts, expanding the capabilities of integrated silicon photonics.
Findings
Achieved high optical quality factor of 1.2×10^6 in the 2 μm band.
Demonstrated OPO with 90 mW threshold power at 1998 nm pump wavelength.
Generated signal and idler wavelengths at 1937 nm and 2063 nm.
Abstract
Continuous wave optical parametric oscillation (OPO) provides a flexible approach for accessing mid-infrared wavelengths between 2 m to 5 m, but has not yet been integrated into silicon nanophotonics. Typically, Kerr OPO uses a single transverse mode family for pump, signal, and idler modes, and relies on a delicate balance to achieve normal (but close-to-zero) dispersion near the pump and the requisite higher-order dispersion needed for phase- and frequency-matching. Within integrated photonics platforms, this approach results in two major problems. First, the dispersion is very sensitive to geometry, so that small fabrication errors can have a large impact. Second, the device is susceptible to competing nonlinear processes near the pump. In this letter, we propose a flexible solution to infrared OPO that addresses these two problems, by using a silicon nitride photonic…
Peer Reviews
No public reviews on file for this paper yet. If you reviewed it on a platform where reviews are public (OpenReview, ICLR, NeurIPS, ICML), you can paste yours below so the community can read it here.
Videos
No videos yet. Explain this paper in a talk, walkthrough, or lecture? Add one.
