Hollow-core fibers with reduced surface roughness and ultralow loss in the short-wavelength range

TL;DR

This paper introduces a novel fabrication method for hollow-core fibers that significantly reduces surface roughness, leading to ultralow optical losses in the short-wavelength spectrum, surpassing previous fiber performance.

Contribution

The study develops a new fabrication technique applying counter directional gas fluxes to minimize core surface roughness in hollow-core fibers, achieving record low losses at short wavelengths.

Findings

Surface roughness reduced from 0.40 nm to 0.15 nm.

Achieved ultralow loss values as low as 50 dB/km at 290 nm.

Potential for loss reduction orders of magnitude compared to silica-core fibers.

Abstract

While optical fibers display excellent performances in the infrared, visible and ultraviolet ranges remain poorly addressed by them. Obtaining better fibers for the short-wavelength range has been restricted, in all fiber optics, by scattering processes. In hollow-core fibers, the scattering loss arises from the core roughness and represents the limiting factor in reducing their loss regardless of the fiber cladding confinement power. To attain fibers performing at short wavelengths, it is paramount developing means to minimize the height variations on the fiber microstructure boundaries. Here, we report on the reduction of the core surface roughness of hollow-core fibers by modifying their fabrication technique. In the novel process proposed herein, counter directional gas fluxes are applied within the fiber holes during fabrication to attain an increased shear rate on its microstructure. The effect of the process on the surface roughness has been quantified by optical profilometry and the results showed that the root-mean-square surface roughness has been reduced from 0.40 nm to 0.15 nm. The improvement in the fiber core surface quality entailed fibers with ultralow loss in the short-wavelength range. We report on fibers with record loss values as low as 50 dB/km at 290 nm, 9.7 dB/km at 369 nm, 5.0 dB/km at 480 nm, and 1.8 dB/km at 719 nm. The results reveal this new approach as a promising path for the development of hollow-core fibers guiding at short wavelengths with loss that can potentially be orders of magnitude lower than the ones achievable with their silica-core counterparts.