What is the SKA-Low Sensitivity for Your Favourite Radio Source ?

TL;DR

This paper presents a sensitivity calculator for SKA-Low, enabling accurate sensitivity predictions for various sky directions, frequencies, and times, based on pre-computed data and validated with real station measurements.

Contribution

It introduces a comprehensive sensitivity prediction tool for SKA-Low, utilizing a database of pre-computed values and validated with real observational data.

Findings

Sensitivity varies with pointing direction and local sidereal time.

The calculator accurately predicts sensitivity across frequencies and directions.

Validation shows good agreement between predictions and actual measurements.

Abstract

The SKA will be the largest radio astronomy observatory ever built, providing unprecedented sensitivity over a very broad frequency (50 MHz to 15.3 GHz). The SKA-Low (50 - 350 MHz), will be built at the MRO in Western Australia. It will consist of 512 stations each composed of 256 dual-polarised antennas, and the sensitivity of an individual station is pivotal to the performance of the entire SKA-Low telescope. The answer to the question in the title is, it depends. The sensitivity of a low frequency array, such as an SKA-Low station, depends strongly on the pointing direction of the digitally formed station beam and the local sidereal time (LST), and is different for the two orthogonal polarisations of the antennas. The accurate prediction of the SKA-Low sensitivity in an arbitrary direction in the sky is crucial for future observation planning. We present here a sensitivity calculator for the SKA-Low radio telescope, using a database of pre-computed sensitivity values for two realisations of an SKA-Low station architecture. One realisation uses the log-periodic antennas selected for SKA-Low. The second uses a known benchmark, in the form of the bowtie dipoles of the MWA. Data collected by both stations (deployed at the MRO in 2019) were used to measure their sensitivity at selected frequencies and over at least 24 h intervals, and were compared to the predictions described in this paper. The sensitivity values stored in the SQLite database were pre-computed for the X, Y and Stokes I polarisations in 10 MHz frequency steps, 0.5 hour LST intervals, and 5 degree resolution in pointing directions. The database allows users to estimate the sensitivity of SKA-Low for their favourite object using interactive web-based or command line interface, which can also calculate the sensitivity for arbitrary pointing directions, frequencies, and times without interpolations.