An Analog Signal Processing EIC-PIC Solution for Coherent Data Center Interconnects

TL;DR

This paper demonstrates the first integration of a silicon photonic coherent receiver with an electronic carrier phase recovery module, enabling high-speed analog processing for data center interconnects with potential for higher data rates.

Contribution

It introduces a novel integrated silicon photonic coherent receiver combined with an electronic phase recovery module, advancing analog domain processing in optical communications.

Findings

Successful experimental demonstration with QPSK signals

System-level integration of photonic and electronic modules

Potential extension to higher-order modulation formats

Abstract

Data center interconnects (DCIs) will have to support throughputs of 400 Gbps or more per wavelength in the near future. To achieve such high data rates, coherent modulation and detection is used, which conventionally requires high-speed data conversion and signal processing in the digital domain. Alternatively, high-speed signal conditioning and processing could be carried out in co-designed photonic and electronic integrated circuits, in the optical and electrical analog domains, respectively, to achieve reduced power consumption, latency, form factor, and cost. A few demonstrations of analog domain processing electronic integrated circuits (EICs), including those of equalizer and carrier phase recovery (CPR) modules showcase progress in this direction in the literature. In this brief, for the first time, we present integration of a silicon photonic integrated coherent receiver (ICR) module with a CPR module, as a part of a complete coherent receiver solution. A phase shifter in the ICR (fabricated in a 220 nm silicon-on-insulator technology) receives feedback from a CPR EIC, and the combination compensates for the time varying phase offset between the modulated signal and the unmodulated carrier in the closed loop configuration. In this proof-of-concept demonstration, we present experimental results obtained from the stand-alone silicon photonic ICR along with its system level integration with CPR chip, for QPSK signals. The technique can be extended to a higher-order modulation format, such as 16-QAM, for data rate scaling. The proposed scheme is suitable for homodyne systems, such as polarization multiplexed carrier based self-homodyne links.