An experimental study of morphological formation in bilayered tubular structures driven by swelling/growth

TL;DR

This study experimentally investigates pattern formation in bilayered tubular structures driven by swelling, comparing results with theoretical and finite element models, revealing insights into surface morphologies and mode transitions.

Contribution

It provides comprehensive experimental data and validation for theoretical and finite element models of pattern formation in swelling bilayered tubes, highlighting mode transitions and interfacial wrinkling.

Findings

Creasing can occur instead of wrinkling when layers have similar properties.

Experimental results align well with theoretical and finite element predictions.

Surface patterns include creases, wrinkles, and mode transitions.

Abstract

This paper presents an experimental investigation on pattern formation and evolution in bilayered tubular organs using swelling deformation of polydimethylsiloxane (PDMS) and aims at supplying a thorough comparison with theoretical and finite element results. To create a twin model in modelling and simulation, the shear modulus in the incompressible neo-Hookean material is estimated via uni-axial tensile and pure shear tests. Five bilayered tubes with different material or geometrical parameters are fabricated. Swelling experiments are carried out for these samples in an individual experimental setup where a plane-strain deformation is guaranteed, and several surface patterns and the associated mode transformations are observed, namely, creases, wrinkles, period-doubling profiles, wrinkle-to-crease transition, and wrinkle-to-period-doubling transition. In particular, an interfacial wrinkling pattern is also observed. To make comparisons, a buckling analysis is conducted within the framework of finite elasticity by means of the Stroh formulation. In addition, a finite element analysis is performed to trace the evolution of surface instabilities. It turns out that the experimental findings agree well with the theoretical predictions as well as the finite element results. From our experiments, it is found that creasing mode may appear instead of wrinkling mode when both layers share a similar mechanical property. It is expected that the current work could provide novel experimental insight into pattern formation in tubular structures, and the good agreement among experimental, theoretical, and simulation consequences supplies strong evidence that a phenomenological growth model is satisfactory to reveal mechanisms behind intricate surface morphology in tubular tissues.