Impact of 3D Structure on Magnetic Reconnection

TL;DR

This study uses high-fidelity resistive MHD simulations to compare 2.5D and 3D magnetic reconnection, revealing that 3D effects generally reduce the reconnection rate and that the system's behavior approaches 2.5D in weak reconnecting fields.

Contribution

It provides a detailed comparison of 2.5D and 3D magnetic reconnection dynamics, highlighting the impact of oblique modes and system geometry on reconnection rates.

Findings

In 2.5D, reconnection rate increases with reconnecting field strength.

In 3D, oblique modes reduce the reconnection rate compared to 2.5D.

Reconnection rates in 3D decrease with stronger reconnecting fields, approaching 2.5D rates in weak fields.

Abstract

Results from 2.5D and 3D studies of the onset and development of the tearing instability are presented, using high fidelity resistive MHD simulations. A limited parameter study of the strength of the reconnecting field (or shear angle) was performed. An initially simple 1D equilibrium was used, consisting of a modified force-free current sheet, with periodic boundary conditions in all directions. In all cases, the linear and non-linear evolution led to a primary current sheet between two large flux ropes. The global reconnection rate during this later stage was analyzed in all simulations. It was found that in 2.5D the primary current sheet fragmented due to plasmoids, and as expected, the global reconnection rate, calculated using multiple methods, increases with the strength of the reconnecting field due to a stronger Alfv\'{e}n speed. In 3D, the presence of interacting oblique modes of the tearing instability complicates the simple 2.5D picture, entangling the magnetic field of the inflow and introducing a negative effect on the reconnection rate. The two competing effects of stronger Alfv\'{e}n speed and entangling, which both increase with the strength of the reconnecting field, resulted in a decrease in the reconnection rate with increasing reconnecting field. For all simulations, the 3D rates were less than in 2.5D, but suggest that as one goes to weak reconnecting field (or strong guide field), the system becomes more 2.5D like and the 2.5D and 3D rates converge. These results have relevance to situations like nano-flare heating and flare current sheets in the corona.