Superior enhancement in thermal conductivity of epoxy/graphene nanocomposites through use of dimethylformamide (DMF) relative to acetone as solvent

TL;DR

This study shows that using DMF as a solvent significantly improves the dispersion of graphene in epoxy, leading to higher thermal conductivity in nanocomposites compared to acetone, with potential applications in thermal management.

Contribution

First to demonstrate the impact of solvent choice on thermal conductivity enhancement in epoxy-graphene nanocomposites, highlighting DMF's superior dispersion capabilities.

Findings

DMF-based composites show 44% higher thermal conductivity than acetone-based ones.

LSCM imaging reveals more uniform graphene dispersion with DMF, reducing agglomeration.

Lower interface thermal resistance observed in DMF composites compared to acetone.

Abstract

In this work, we demonstrate that use of dimethylformamide (DMF) as a solvent leads to better dispersion of graphene nanoplatelets in epoxy matrix compared to acetone solvent, in turn leading to higher thermal conductivity epoxy-graphene nanocomposites. While role of solvents in enabling superior mechanical properties has been addressed before, outlined study is the first to address the effect of solvents on thermal conductivity enhancement and provides novel pathways for achieving high thermal conductivity polymer composite materials. Uniform dispersion of graphene nanoparticles into epoxy can improve thermal contact with polymer leading to superior interface thermal conductance between polymer matrix and graphene. Organic solvents are typically employed to achieve efficient dispersion of graphene into the epoxy matrix. In this study, we compare the effect of two organic solvents, dimethylformamide (DMF) and acetone, in terms of their efficiency in dispersing graphene into the epoxy matrix and their effect on enhancing thermal conductivity of the composite. We find that polymer-graphene composites made with DMF solvent show 44% higher thermal conductivity compared to those made using acetone at 7 weight% filler composition. Laser scanning confocal microscopy (LSCM) imaging reveals that graphene-epoxy composites, prepared using DMF as solvent, exhibit more uniform dispersion of graphene-nanoplatelets compared to the case of acetone with acetone-based samples exhibiting up to 211% larger graphene agglomerations. Comparison with effective medium theory reveals an almost 35% lower interface thermal resistance between graphene and epoxy for DMF relative to acetone prepared composite. These results provide fundamentally new avenues to achieve higher thermal conductivity graphene-epoxy composites, of key importance for a wide range of thermal management technologies.