Spectral Ultrasound Imaging of Speed-of-Sound and Attenuation Using an Acoustic Mirror

TL;DR

This paper introduces a novel Fourier-domain method for spectral ultrasound imaging that accurately reconstructs tissue-specific speed-of-sound and attenuation maps, potentially serving as diagnostic biomarkers.

Contribution

The study presents a new Fourier-based approach for spectral ultrasound imaging of tissue properties, improving accuracy and enabling tissue differentiation.

Findings

Low reconstruction error in simulations (0.01 dB/cm.MHz^y for attenuation)

High contrast in tissue-mimicking phantoms and ex-vivo samples

Frequency-dependent tissue characteristics can differentiate tissue types

Abstract

Speed-of-sound and attenuation of ultrasound waves vary in the tissues. There exist methods in the literature that allow for spatially reconstructing the distribution of group speed-of-sound (SoS) and frequency-dependent ultrasound attenuation (UA) using reflections from an acoustic mirror positioned at a known distance from the transducer. These methods utilize a conventional ultrasound transducer operating in pulse-echo mode and a calibration protocol with measurements in water. In this study, we introduce a novel method for reconstructing local SoS and UA maps as a function of acoustic frequency through Fourier-domain analysis and by fitting linear and power-law dependency models in closed form. Frequency-dependent SoS and UA together characterize the tissue comprehensively in spectral domain within the utilized transducer bandwidth. In simulations, our proposed methods are shown to yield low reconstruction error: 0.01 dB/cm.MHz^y for attenuation coefficient and 0.05 for the frequency exponent. For tissue-mimicking phantoms and ex-vivo bovine muscle samples, a high reconstruction contrast was achieved. Attenuation exponents in a gelatin-cellulose mixture and an ex-vivo bovine muscle sample were found to be, respectively, 1.3 and 0.6 on average. Linear dispersion of SoS in a gelatin-cellulose mixture and an ex-vivo bovine muscle sample were found to be, respectively, 1.3 and 4.0 m/s.MHz on average. These findings were reproducible when the inclusion and substrate materials were exchanged. Bulk loss modulus in the bovine muscle sample was computed to be approximately 4 times the bulk loss modulus in the gelatin-cellulose mixture. Such frequency-dependent characteristics of SoS and UA, and bulk loss modulus may therefore differentiate tissues as potential diagnostic biomarkers.