Stress field prediction in fiber-reinforced composite materials using a deep learning approach

TL;DR

This paper presents a deep learning approach using a U-Net architecture to predict stress fields in fiber-reinforced composites, aiming to replace traditional FEM analysis with a faster, data-driven method.

Contribution

It introduces a CNN-based model for stress prediction in composite materials and explores transferability to systems with more fibers, reducing computational costs.

Findings

U-Net accurately predicts stress fields for fixed fiber configurations.

The model's robustness varies with training sample size.

Transfer learning enables stress prediction for larger fiber systems.

Abstract

Computational stress analysis is an important step in the design of material systems. Finite element method (FEM) is a standard approach of performing stress analysis of complex material systems. A way to accelerate stress analysis is to replace FEM with a data-driven machine learning based stress analysis approach. In this study, we consider a fiber-reinforced matrix composite material system and we use deep learning tools to find an alternative to the FEM approach for stress field prediction. We first try to predict stress field maps for composite material systems of fixed number of fibers with varying spatial configurations. Specifically, we try to find a mapping between the spatial arrangement of the fibers in the composite material and the corresponding von Mises stress field. This is achieved by using a convolutional neural network (CNN), specifically a U-Net architecture, using true stress maps of systems with same number of fibers as training data. U-Net is a encoder-decoder network which in this study takes in the composite material image as an input and outputs the stress field image which is of the same size as the input image. We perform a robustness analysis by taking different initializations of the training samples to find the sensitivity of the prediction accuracy to the small number of training samples. When the number of fibers in the composite material system is increased for the same volume fraction, a finer finite element mesh discretization is required to represent the geometry accurately. This leads to an increase in the computational cost. Thus, the secondary goal here is to predict the stress field for systems with larger number of fibers with varying spatial configurations using information from the true stress maps of relatively cheaper systems of smaller fiber number.