Low-Voltage Magnetoelectric Coupling in Membrane Heterostructures

TL;DR

This study demonstrates low-voltage magnetoelectric coupling in freestanding PMN-PT/Ni heterostructures, enabling efficient magnetic control with minimal voltage, advancing low-power multifunctional device technology.

Contribution

First demonstration of low-voltage ME coupling in all-thin-film membrane heterostructures using anisotropic strains from (011) PMN-PT.

Findings

Achieved 90-degree Ni magnetization rotation with 3V bias

Removed substrate clamping to enhance piezoelectric response

Clarified membrane response via microscopy and simulations

Abstract

Strain-mediated magnetoelectric (ME) coupling in ferroelectric (FE) / ferromagnetic (FM) heterostructures offers a unique opportunity for both fundamental scientific research and low power multifunctional devices. Relaxor-ferroelectrics, like (1-x)Pb(Mg1/3Nb2/3)O3-(x)PbTiO3 (PMN-xPT), are ideal FE layer candidates due to their giant piezoelectricity. But thin films of PMN-PT suffer from substrate clamping which substantially reduces piezoelectric in-plane strains. Here we present the first demonstration of low voltage ME coupling in an all-thin-film heterostructure which utilizes the anisotropic strains induced by the (011) orientation of PMN-PT. We completely remove PMN-PT films from their substrate and couple with FM Ni overlayers to create membrane PMN-PT/Ni heterostructures showing 90 degree Ni magnetization rotation with 3V PMN-PT bias, much less than the bulk PMNPT ~100V requirement. Scanning transmission electron microscopy and phase-field simulations clarify the membrane response. These results provide a crucial step towards understanding the microstructural behavior of PMN-PT thin films for use in piezo-driven magnetoelectric heterostructures.