From Stoop to Squat: A comprehensive analysis of lumbar loading among different lifting styles

TL;DR

This study compares lumbar loads among different lifting styles using advanced musculoskeletal modeling, revealing that stoop lifting results in lower compressive loads but higher shear loads compared to other techniques.

Contribution

It provides a comprehensive biomechanical analysis of lumbar loading in various lifting styles using motion capture and musculoskeletal modeling, challenging traditional assumptions.

Findings

Stoop lifting shows significantly lower compressive and total lumbar loads.

Stoop lifting produces higher shear loads in upper lumbar segments.

Lifting time is shortest in freestyle lifting.

Abstract

Lifting up objects from the floor has been identified as a risk factor for low back pain, whereby a flexed spine during lifting is often associated with producing higher loads in the lumbar spine. Even though recent biomechanical studies challenge these assumptions, conclusive evidence is still lacking. This study therefore aimed at comparing lumbar loads among different lifting styles using a comprehensive state-of-the-art motion capture-driven musculoskeletal modeling approach. Thirty healthy pain-free individuals were enrolled in this study and asked to repetitively lift a 15 kg-box by applying 1) a freestyle, 2) a squat and 3) a stoop lifting technique. Whole-body kinematics were recorded using an optical motion capture system and used to drive a full-body musculoskeletal model including a detailed thoracolumbar spine. Compressive, shear and total loads were calculated based on a static optimization approach and expressed as factor body weight (BW). In addition, lumbar lordosis angles and total lifting time were calculated. All parameters were compared among the lifting styles using a repeated measures design. For all lumbar segments, stoop lifting showed significantly lower compressive and total loads (-0.3 to -1.0BW) when compared to freestyle and squat lifting. Stoop lifting produced higher shear loads (+0.1 to +0.8BW) in the segments T12/L1 to L4/L5, but lower loads in L5/S1 (-0.2 to -0.4BW). Peak compressive and total loads during squat lifting occurred approximately 30% earlier in the lifting cycle compared to stoop lifting. Stoop lifting showed larger lumbar lordosis range of motion (35.9+/-10.1{\deg}) than freestyle (24.2+/-7.3{\deg}) and squat (25.1+/-8.2{\deg}) lifting. Lifting time differed significantly with freestyle being executed the fastest (4.6+/-0.7s), followed by squat (4.9+/-0.7s) and stoop (5.9+/-1.1s).