Automatic digital twin data model generation of building energy systems from piping and instrumentation diagrams

TL;DR

This paper presents an automated method for extracting building energy system models from piping and instrumentation diagrams, enabling faster digital twin creation for improved building control and energy efficiency.

Contribution

It introduces a novel automated approach for recognizing symbols and connections in P&ID diagrams, facilitating standardized digital twin data generation for building energy systems.

Findings

Symbol recognition accuracy of 93.7%

Automated extraction of system connections

Potential for improved building control models

Abstract

Buildings directly and indirectly emit a large share of current CO2 emissions. There is a high potential for CO2 savings through modern control methods in building automation systems (BAS) like model predictive control (MPC). For a proper control, MPC needs mathematical models to predict the future behavior of the controlled system. For this purpose, digital twins of the building can be used. However, with current methods in existing buildings, a digital twin set up is usually labor-intensive. Especially connecting the different components of the technical system to an overall digital twin of the building is time-consuming. Piping and instrument diagrams (P&ID) can provide the needed information, but it is necessary to extract the information and provide it in a standardized format to process it further. In this work, we present an approach to recognize symbols and connections of P&ID from buildings in a completely automated way. There are various standards for graphical representation of symbols in P&ID of building energy systems. Therefore, we use different data sources and standards to generate a holistic training data set. We apply algorithms for symbol recognition, line recognition and derivation of connections to the data sets. Furthermore, the result is exported to a format that provides semantics of building energy systems. The symbol recognition, line recognition and connection recognition show good results with an average precision of 93.7%, which can be used in further processes like control generation, (distributed) model predictive control or fault detection. Nevertheless, the approach needs further research.