Flight mask designs of the Roman Space Telescope Coronagraph Instrument

TL;DR

This paper details the design and intended configurations of flight masks for the Roman Space Telescope's Coronagraph Instrument, crucial for high-contrast exoplanet imaging technology demonstration.

Contribution

It provides a comprehensive overview of the flight coronagraph mask designs and their planned configurations for the Roman Space Telescope's exoplanet imaging mission.

Findings

Complete set of flight coronagraph mask designs described

Configurations include a primary, supported, and unsupported masks

Potential for additional masks to be commissioned post-initial phase

Abstract

Over the past two decades, thousands of confirmed exoplanets have been detected; the next major challenge is to characterize these other worlds and their stellar systems. Much information on the composition and formation of exoplanets and circumstellar debris disks can only be achieved via direct imaging. Direct imaging is challenging because of the small angular separations ($<1$ arcsec) and high star-to-planet flux ratios (${\sim}10^{9}$ for a Jupiter analog or ${\sim}10^{10}$ for an Earth analog in the visible). Atmospheric turbulence prohibits reaching such high flux ratios on the ground, so observations must be made above the Earth's atmosphere. The Nancy Grace Roman Space Telescope (Roman), set to launch in the mid-2020s, will be the first space-based observatory to demonstrate high-contrast imaging with active wavefront control using its Coronagraph Instrument. The instrument's main purpose is to mature the various technologies needed for a future flagship mission to image and characterize Earth-like exoplanets. These technologies include two high-actuator-count deformable mirrors, photon-counting detectors, two complementary wavefront sensing and control loops, and two different coronagraph types. In this paper, we describe the complete set of flight coronagraph mask designs and their intended combinations in the Roman Coronagraph Instrument. There are three types of mask configurations included: a primary one designed to meet the instrument's top-level requirement, three that are supported on a best-effort basis, and several unsupported ones contributed by the NASA Exoplanet Exploration Program. The unsupported mask configurations could be commissioned and used if the instrument is approved for operations after its initial technology demonstration phase.