Gaia Early Data Release 3: Updated radial velocities from Gaia DR2

TL;DR

This paper discusses the inclusion and validation of Gaia DR2 radial velocities in the EDR3 release, highlighting improvements, limitations, and lessons for future Gaia data releases.

Contribution

It provides a detailed methodology for propagating DR2 radial velocities into EDR3 and analyzes the reliability and limitations of this process.

Findings

99.8% of DR2 radial velocities are included in EDR3

Erroneous radial velocities have been significantly reduced in EDR3

Matching issues due to binary components affect radial velocity propagation

Abstract

Gaia's Early Third Data Release (EDR3) does not contain new radial velocities because these will be published in Gaia's full third data release (DR3), expected in the first half of 2022. To maximise the usefulness of EDR3, Gaia's second data release (DR2) sources (with radial velocities) are matched to EDR3 sources to allow their DR2 radial velocities to also be included in EDR3. This presents two considerations: (i) arXiv:1901.10460 (hereafter B19) published a list of 70,365 sources with potentially contaminated DR2 radial velocities; and (ii) EDR3 is based on a new astrometric solution and a new source list, which means sources in DR2 may not be in EDR3. EDR3 contains 7,209,831 sources with a DR2 radial velocity, which is 99.8% of sources with a radial velocity in DR2. 14,800 radial velocities from DR2 are not propagated to any EDR3 sources because (i) 3871 from the B19 list are found to either not have an unpublished, preliminary DR3 radial velocity or it differs significantly from its DR2 value, and 5 high-velocity stars not in the B19 list are confirmed to have contaminated radial velocities; and (ii) 10,924 DR2 sources could not be satisfactorily matched to any EDR3 sources, so their DR2 radial velocities are also missing from EDR3. The reliability of radial velocities in EDR3 has improved compared to DR2 because the update removes a small fraction of erroneous radial velocities (0.05% of DR2 radial velocities and 5.5% of the B19 list). Lessons learnt from EDR3 (e.g. bright star contamination) will improve the radial velocities in future Gaia data releases. The main reason for radial velocities from DR2 not propagating to EDR3 is not related to DR2 radial velocity quality. It is because the DR2 astrometry is based on one component of close binary pairs, while EDR3 astrometry is based on the other component, which prevents these sources from being unambiguously matched. (Abridged)