Low-Cost Access to the Deep, High-Cadence Sky: the Argus Optical Array

TL;DR

The paper introduces the Argus Array, a cost-effective, high-cadence, all-sky telescope array using mass-produced small telescopes, enabling rapid, deep, wide-field sky surveys for transient phenomena and other astrophysical events.

Contribution

It presents a novel design for a large, all-sky telescope array that significantly reduces costs and complexity through innovative engineering and software solutions.

Findings

Argus Array can cover 20% of the sky to g=19.6 each minute

Deep coadds reach g=23.6 every five nights over 47% of the sky

Total cost of the array could be below $20 million

Abstract

New mass-produced, wide-field, small-aperture telescopes have the potential to revolutionize ground-based astronomy by greatly reducing the cost of collecting area. In this paper, we introduce a new class of large telescope based on these advances: an all-sky, arcsecond-resolution, 1000-telescope array which builds a simultaneously high-cadence and deep survey by observing the entire sky all night. As a concrete example, we describe the Argus Array, a 5m-class telescope with an all-sky field of view and the ability to reach extremely high cadences using low-noise CMOS detectors. Each 55 GPix Argus exposure covers 20% of the entire sky to g=19.6 each minute and g=21.9 each hour; a high-speed mode will allow sub-second survey cadences for short times. Deep coadds will reach g=23.6 every five nights over 47% of the sky; a larger-aperture array telescope, with an \'etendue close to the Rubin Observatory, could reach g=24.3 in five nights. These arrays can build two-color, million-epoch movies of the sky, enabling sensitive and rapid searches for high-speed transients, fast-radio-burst counterparts, gravitational-wave counterparts, exoplanet microlensing events, occultations by distant solar system bodies, and myriad other phenomena. An array of O(1,000) telescopes, however, would be one of the most complex astronomical instruments yet built. Standard arrays with hundreds of tracking mounts entail thousands of moving parts and exposed optics, and maintenance costs would rapidly outpace the mass-produced-hardware cost savings compared to a monolithic large telescope. We discuss how to greatly reduce operations costs by placing all optics in a thermally controlled, sealed dome with a single moving part. Coupled with careful software scope control and use of existing pipelines, we show that the Argus Array could become the deepest and fastest Northern sky survey, with total costs below $20M.