Polymer-Derived SiOC Integrated with a Graphene Aerogel As a Highly Stable Li-Ion Battery Anode
Gaofeng Shao, Dorian A. H. Hanaor, Jun Wang, Delf Kober, Shuang Li,, Xifan Wang, Xiaodong Shen, Maged F. Bekheet, and Aleksander Gurlo

TL;DR
This study develops a layered graphene SiOC heterostructure as a lithium-ion battery anode, achieving high capacity and stability through microstructure modification and enhanced transport properties.
Contribution
It introduces a novel fabrication method for graphene SiOC heterostructures that significantly improves anode performance in lithium-ion batteries.
Findings
Achieved a reversible capacity of 751 mAh/g at low rates.
Maintained 95% capacity after 1000 cycles at high charge rates.
Enhanced transport properties and cycling stability compared to unsupported SiOC.
Abstract
Amorphous polymer derived silicon oxycarbide (SiOC) is an attractive candidate for Lithium ion battery anodes, as an alternative to graphite, which is limited to a theoretical capacity of 372 mAh/g. However, SiOC tends to exhibit poor transport properties and cycling performance as a result of sparsely distributed carbon clusters and inefficient active sites. To overcome these limitations, we designed and fabricated a layered graphene SiOC heterostructure by solvent assisted infiltration of a polymeric precursor into a modified three dimensional graphene aerogel skeleton. The use of a high melting point solvent facilitated the precursors freeze drying, which following pyrolysis yielded SiOC as a layer supported on the surface of nitrogen doped reduced graphene oxide aerogels. The fabrication method employed here modifies the composition and microstructure of the SiOC phase. Among the…
Peer Reviews
No public reviews on file for this paper yet. If you reviewed it on a platform where reviews are public (OpenReview, ICLR, NeurIPS, ICML), you can paste yours below so the community can read it here.
Videos
No videos yet. Explain this paper in a talk, walkthrough, or lecture? Add one.
