Crack-free caustic magnesia-bonded refractory castables

TL;DR

This study develops crack-free magnesia-bonded refractory castables by adding aluminum hydroxyl lactate to control hydration, resulting in improved properties and resistance to spalling at high temperatures.

Contribution

It introduces a novel method of using aluminum hydroxyl lactate to control hydration in magnesia-bonded castables, preventing cracks and enhancing performance.

Findings

Addition of 1.0 wt.% AHL yields crack-free castables.

Hydrotalcite-like phases replace Mg(OH)2 in hydrated products.

Enhanced spalling resistance and mechanical properties.

Abstract

A growing interest in designing high-alumina MgO-bonded refractory castables has been identified in recent years due to the magnesia ability to react: (i) with water at the initial processing stages of these materials (inducing the precipitation of brucite phase) or (ii) with alumina, giving rise to in situ MgAl2O4 generation at high temperatures. Nevertheless, despite the great potential of caustic magnesia to be used as a binder in such systems due to its high reactivity, it is still a challenge to control the hydration reaction rate of this oxide and the negative effects derived from the expansive feature of Mg(OH)2 formation. Thus, this work evaluated the incorporation of different contents of aluminum hydroxyl lactate (AHL) into caustic magnesia-bonded castables, aiming to control the brucite precipitation during the curing and drying steps of the prepared samples, resulting in crack-free refractories. The designed compositions were characterized via flowability, setting behavior, X-ray diffraction, cold flexural strength, porosity, permeability and thermogravimetric measurements. According to the results, instead of Mg(OH)2, hydrotalcite-like phases [Mg6Al2(OH)16(OH)2.4.5H2O and Mg6Al2(OH)16(CO3).4H2O] were the main hydrated phases identified in the AHL-containing compositions. The addition of 1.0 wt.% of aluminum hydroxyl lactate to the designed castable proved to be, so far, the best option for this magnesia source, resulting in the development of a crack-free refractory with enhanced properties and greater spalling resistance under heating.