Self-critical machine-learning wall-modeled LES for external aerodynamics

TL;DR

This paper introduces a novel self-critical machine learning wall model for LES that predicts wall stress in complex turbulent flows by combining flow building blocks through neural networks, improving accuracy in external aerodynamics.

Contribution

It proposes a new flow modeling approach using neural networks with flow building blocks, enhancing wall stress predictions in turbulent external aerodynamics.

Findings

Accurately predicts wall stress in unseen external aerodynamic flows.

Provides confidence estimates to identify underperforming regions.

Validated on NASA Juncture Flow Experiment with promising results.

Abstract

The prediction of aircraft aerodynamic quantities of interest remains among the most pressing challenges for computational fluid dynamics. The aircraft aerodynamics are inherently turbulent with mean-flow three-dimensionality, often accompanied by laminar-to-turbulent transition, flow separation, secondary flow motions at corners, and shock wave formation, to name a few. However, the most widespread wall models are built upon the assumption of statistically-in-equilibrium wall-bounded turbulence and do not faithfully account for the wide variety of flow conditions described above. This raises the question of how to devise models capable of accounting for such a vast and rich collection of flow physics in a feasible manner. In this work, we propose tackling the wall-modeling challenge by devising the flow as a collection of building blocks, whose information enables the prediction of the stress as the wall. The model relies on the assumption that simple canonical flows contain the essential flow physics to devise accurate models. Three types of building block units were used to train the model: turbulent channel flows, turbulent ducts and turbulent boundary layers with separation. This limited training set will be extended in future versions of the model. The approach is implemented using two interconnected artificial neural networks: a classifier, which identifies the contribution of each building block in the flow; and a predictor, which estimates the wall stress via non-linear combinations of building-block units. The output of the model is accompanied by the confidence in the prediction. The latter value aids the detection of areas where the model underperforms, such as flow regions that are not representative of the building blocks used to train the model. The model is validated in a unseen case representative of external aerodynamic applications: the NASA Juncture Flow Experiment.