Phase Transitions in Germanium Telluride Nanoparticle Phase-Change Materials Studied by Time-Resolved X-Ray Diffraction

TL;DR

This study investigates size-dependent phase transitions in colloidal GeTe nanoparticles using time-resolved X-ray diffraction, revealing shifted transition temperatures but preserved phase behavior, highlighting their potential for photonic applications.

Contribution

It demonstrates that colloidal GeTe nanoparticles exhibit similar phase transitions as bulk GeTe, with size-dependent temperature shifts, enabling flexible fabrication for photonics.

Findings

Amorphous-to-α transition occurs between 210°C and 240°C.

α-to-β transition occurs between 370°C and 420°C.

Transition temperatures are shifted compared to bulk GeTe.

Abstract

Germanium telluride (GeTe), a phase-change material, is known to exhibit four different structural phases: three at room temperature (one amorphous and two crystalline, $\alpha$ and $\gamma$) and one at high temperature (crystalline $\beta$). Because transitions between the amorphous and crystalline phases lead to significant changes in material properties (e.g., refractive index and resistivity), GeTe has been investigated as a phase-change material for photonics, thermoelectrics, ferroelectrics, and spintronics. Consequently, the temperature-dependent phase transitions in GeTe have been studied for bulk and thin-film GeTe, both fabricated by sputtering. Colloidal synthesis of nanoparticles offers a more flexible fabrication approach for amorphous and crystalline GeTe. These nanoparticles are known to exhibit size-dependent properties, such as an increased crystallization temperature for the amorphous-to-$\alpha$ transition in sub-10\,nm GeTe particles. The $\alpha$-to-$\beta$ phase transition is also expected to vary with size, but this effect has not yet been investigated for GeTe. Here, we report time-resolved X-ray diffraction of GeTe nanoparticles with different diameters and from different synthetic protocols. We observe a non-volatile amorphous-to-$\alpha$ transition between 210$^{\circ}$C and 240$^{\circ}$C and a volatile $\alpha$-to-$\beta$ transition between 370$^{\circ}$C and 420$^{\circ}$C. The latter transition was reversible and repeatable. While the transition temperatures are shifted relative to the values known for bulk GeTe, the nanoparticle-based samples still exhibit the same structural phases reported for sputtered GeTe. Thus, colloidal GeTe maintains the same general phase behavior as bulk GeTe while allowing for more flexible and accessible fabrication. Therefore, nanoparticle-based GeTe films show great potential for applications, such as in active photonics.