Collapse and cavitation during drying of water-saturated PDMS sponges with closed porosity
Phu Tuan Anh Nguyen (SIMM), Matthieu Vandamme (NAVIER UMR 8205), Artem, Kovalenko (SIMM)

TL;DR
This study investigates how pore size influences collapse and cavitation during drying of water-saturated PDMS sponges with closed porosity, revealing size-dependent behaviors and cooperative effects.
Contribution
It provides the first experimental evidence of pore-size-dependent and cooperative drying responses in soft closed-porosity sponges.
Findings
Pores smaller than 30 μm mostly remain collapsed due to low cavitation probability.
Pores larger than 100 μm tend to reopen after cavitation.
Cavitation in large pores can induce reopening of neighboring small pores.
Abstract
In this paper, we study the drying of water-saturated porous polydimethylsiloxane (PDMS) elastomers with closed porosity in which the evaporation of water is possible only via the diffusion across the PDMS. Starting from water/PDMS emulsions, we fabricate soft macroporous samples with different pore diameter distributions and average diameters ranging from 10 to 300 m. In these materials, the drying may lead either to a collapsed state with low porosity or to the cavitation and reopening of a fraction of the pores. Using optical microscopy and porosity measurements, we showed the importance of the pore diameters and interactions on the result of drying. At pore diameters lower than 30 m, the majority of pores remain collapsed. We attribute the permanence of the collapse of most small pores to a low probability of cavitation and to the adhesion of the pore walls. Pores with…
Peer Reviews
No public reviews on file for this paper yet. If you reviewed it on a platform where reviews are public (OpenReview, ICLR, NeurIPS, ICML), you can paste yours below so the community can read it here.
Videos
No videos yet. Explain this paper in a talk, walkthrough, or lecture? Add one.
