Maximizing spin-orbit torque efficiency of Ta(O)/Py via modulating oxygen-induced interface orbital hybridization

TL;DR

This study demonstrates that oxygen-induced orbital hybridization at the Ta(O)/Py interface significantly enhances spin-orbit torque efficiency, primarily through interfacial Rashba effects, offering a new route to improve spintronic device performance.

Contribution

It reveals that modulating oxygen levels at the Ta(O)/Py interface boosts spin-orbit torque efficiency by enhancing interfacial Rashba effects, a novel approach in spintronics.

Findings

Spin Hall angle increases from -0.18 to -0.30 with oxygenation.

Interfacial Rashba effect contributes over twice the efficiency enhancement.

65% increase in spin-orbit torque efficiency due to orbital hybridization.

Abstract

Spin-orbit torques due to interfacial Rashba and spin Hall effects have been widely considered as a potentially more efficient approach than the conventional spin-transfer torque to control the magnetization of ferromagnets. We report a comprehensive study of spin-orbit torque efficiency in Ta(O)/Ni81Fe19 bilayers by tuning low-oxidation of \b{eta}-phase tantalum, and find that the spin Hall angle {\theta}DL increases from ~ -0.18 of the pure Ta/Py to the maximum value ~ -0.30 of Ta(O)/Py with 7.8% oxidation. Furthermore, we distinguish the efficiency of the spin-orbit torque generated by the bulk spin Hall effect and by interfacial Rashba effect, respectively, via a series of Py/Cu(0-2 nm)/Ta(O) control experiments. The latter has more than twofold enhancement, and even more significant than that of the former at the optimum oxidation level. Our results indicate that 65% enhancement of the efficiency should be related to the modulation of the interfacial Rashba-like spin-orbit torque due to oxygen-induced orbital hybridization cross the interface. Our results suggest that the modulation of interfacial coupling via oxygen-induced orbital hybridization can be an alternative method to boost the change-spin conversion rate.