Clock Drift Impact on Target Wake Time in IEEE 802.11ax/ah Networks
Dmitry Bankov, Evgeny Khorov, Andrey Lyakhov, Ekaterina Stepanova

TL;DR
This paper examines how clock drift affects Target Wake Time in IEEE 802.11ax/ah networks, comparing two modes of uplink transmission to optimize energy efficiency and transmission reliability in IoT devices.
Contribution
It provides a comparative analysis of two TWT operation modes, highlighting their impact on transmission time, packet loss, and energy consumption under clock drift conditions.
Findings
Mode 1 achieves lower transmission time at a given packet loss rate.
Mode 2 results in lower energy consumption when configured for the same packet loss.
Clock drift significantly influences TWT performance and energy efficiency.
Abstract
In the Internet of Things scenarios, it is crucially important to provide low energy consumption of client devices. To address this challenge, new Wi-Fi standards introduce the Target Wake Time (TWT) mechanism. With TWT, devices transmit their data according to a schedule and move to the doze state afterwards. The main problem of this mechanism is the clock drift phenomenon, because of which the devices cease to strictly comply with the schedule. As a result, they can miss the scheduled transmission time, which increases active time and thus power consumption. The paper investigates uplink transmission with two different TWT operation modes. With the first mode, a sensor transmits a packet to the access point (AP) after waking up, using the random channel access. With the second mode, the AP polls stations and they can transmit a packet only after receiving a trigger frame from the AP.…
Peer Reviews
No public reviews on file for this paper yet. If you reviewed it on a platform where reviews are public (OpenReview, ICLR, NeurIPS, ICML), you can paste yours below so the community can read it here.
Videos
No videos yet. Explain this paper in a talk, walkthrough, or lecture? Add one.
