eSampling: Rethinking Sampling with Energy Harvesting

TL;DR

This paper introduces eSampling, a novel approach that rethinks the sampling process by utilizing discarded signal energy for harvesting, demonstrated through circuit modifications and simulations, with practical hardware validation.

Contribution

It proposes a new sampling method that combines analog-to-digital conversion with energy harvesting, using circuit modifications and validation to improve energy efficiency.

Findings

10% of sampling period suffices for signal sampling

Remaining 90% can be used for energy harvesting

Hardware validation confirms simulation results

Abstract

In general, real world signals are analog in nature. To capture these signals for further processing, or transmission, signals are converted into digital bits using analog-to-digital converter (ADC). In this conversion, a good amount of signal energy is wasted because signal that is captured within the sampling duration is utilized, while rest of the signal waveform is discarded. In this context, this paper revisits the sampling process and proposes to utilize this discarded signal for energy harvesting, naming the method as eSampling, i.e., sampling with energy harvesting. The proposed idea of \textit{eSampling} is demonstrated via modifying the circuitry of the hold phase of ADC. The system is designed using standard Complementary Metal Oxide Semiconductor (CMOS) 65 nm technology and simulations are performed on Cadence Virtuoso platform with input signal at different frequencies (100 Hz and 40 MHz). These results show that 10\% of the sampling period is sufficient to sample the input analog signal, while the remaining 90\% can be used for harvesting the energy from the input analog signal. In order to validate eSampling for practical scenarios, results with hardware setup have also been added.