An optical test bench for the precision characterization of absolute quantum efficiency for the TESS CCD detectors

TL;DR

This paper presents an optical test bench designed for highly precise measurement of the absolute quantum efficiency of CCD detectors used in the TESS mission, aiding in accurate space data analysis.

Contribution

It introduces a novel optical test setup with high stability for accurate QE characterization of CCDs for space telescopes.

Findings

High photometric stability achieved in the test bench

Precise QE measurements obtained for TESS CCDs

Design methodology for QE testing detailed

Abstract

The Transiting Exoplanet Survey Satellite (TESS) will search for planets transiting bright stars with Ic<13. TESS has been selected by NASA for launch in 2018 as an Astrophysics Explorer mission, and is expected to discover a thousand or more planets that are smaller in size than Neptune. TESS will employ four wide-field optical charge-coupled device (CCD) cameras with a band-pass of 650 nm-1050 nm to detect temporary drops in brightness of stars due to planetary transits. The 1050 nm limit is set by the quantum efficiency (QE) of the CCDs. The detector assembly consists of four back-illuminated MIT Lincoln Laboratory CCID-80 devices. Each CCID-80 device consists of 2048x2048 imaging array and 2048x2048 frame store regions. Very precise on-ground calibration and characterization of CCD detectors will significantly assist in the analysis of the science data obtained in space. The characterization of the absolute QE of the CCD detectors is a crucial part of the characterization process because QE affects the performance of the CCD significantly over the redder wavelengths at which TESS will be operating. An optical test bench with significantly high photometric stability has been developed to perform precise QE measurements. The design of the test setup along with key hardware, methodology, and results from the test campaign are presented.