Three-dimensional magnetic field structure of a flux emerging region in the solar atmosphere

TL;DR

This study uses high-resolution spectropolarimetric data and magnetic field extrapolations to analyze the 3D magnetic structure and dynamics of a flux emerging region in the solar atmosphere, revealing complex magnetic topology and flow patterns.

Contribution

It provides a detailed 3D magnetic field reconstruction of a flux emerging region using combined spectropolarimetric observations and non-force-free extrapolations, highlighting small-scale loops and their potential role in heating.

Findings

Supersonic downflows of 40 km/sec near loop footpoints.

Strong upflows of 22 km/sec near loop apex.

Loops with maximum heights of 10.5 Mm and 8.4 Mm from the surface.

Abstract

We analyze high-resolution spectropolarimetric observations of a flux emerging region (FER) in order to understand its magnetic and kinematic structure. Our spectropolarimetric observations in the He I 1083.0 nm spectral region of a FER are recorded with GRIS at the 1.5 m aperture GREGOR telescope. A Milne-Eddington based inversion code was employed to extract the photospheric information of the Si I spectral line, whereas the He I triplet line was analyzed with the Hazel inversion code, which takes into account the joint action of the Hanle and the Zeeman effect. The spectropolarimetric analysis of Si I line displays a complex magnetic structure near the vicinity of FER. Moreover, we find supersonic downflows of 40 km/sec appears near the footpoints of loops connecting two pores of opposite polarity, whereas a strong upflows of 22 km/sec appears near the apex of the loops. Furthermore, non-force-free field extrapolations were performed separately at two layers in order to understand the magnetic field topology of the FER. We determine, using extrapolations from the photosphere and the observed chromospheric magnetic field, that the average formation height of the He triplet line is 2 Mm from the solar surface. The reconstructed loops using photospheric extrapolations along an arch filament system have a maximum height of 10.5 Mm from the solar surface with a foot-points separation of 19 Mm, whereas the loops reconstructed using chromospheric extrapolations are around 8.4 Mm high from the solar surface with a foot-point separation of 16 Mm at the chromospheric height. The magnetic topology in the FER suggests the presence of small-scale loops beneath the large loops. Under suitable conditions, due to magnetic reconnection, these loops can trigger various heating events in the vicinity of the FER.