Double frame Tomographic PTV at high seeding densities

TL;DR

This paper introduces Double-Frame Tomo-PTV, a novel 3D particle tracking method that achieves high accuracy at high seeding densities by combining sparse reconstruction, correlation, and subvoxel refinement.

Contribution

The paper presents a new tomographic particle tracking technique that improves particle detection and velocity estimation at high seeding densities compared to existing methods.

Findings

Achieves particle detection efficiency up to 0.08 ppp at high densities.

Lower velocity estimation error than state-of-the-art methods.

Successfully applied to experimental jet flow with realistic seeding densities.

Abstract

A novel method performing 3D PTV from double frame multi-camera images is introduced. Particle velocities are estimated by following three steps. Firstly, separate particle reconstructions with a sparsity-based algorithm are performed on a fine grid. Secondly, they are expanded on a coarser grid on which 3D correlation is performed, yielding a predictor displacement field that allows to efficiently match particles at the two time instants. As these particles are still located on a voxel grid, the third, final step achieves particle position refinement to their actual subvoxel position by a global optimization process, also accounting for their intensities. As it strongly leverages on principles from tomographic reconstruction, the technique is termed Double-Frame Tomo-PTV (DF-TPTV). Synthetic tests on a complex turbulent flow show that the method achieves high particle and vector detection efficiency, up to seeding densities of around 0.08 particles per pixel (ppp), while its root-mean-square error of velocity estimation is lower to that of state-of-the-art similar methods. Results from an experimental campaign on a transitional round air jet at Reynolds number 4600 are also presented. During the tests, seeding density varies from 0.06 to 0.03 ppp on average. Associated to an outlier rejection scheme based on temporal statistics, DF-TPTV vector fields truthfully correspond to the instantaneous jet dynamics. Quantitative performance assessment is provided by introducing statistics performed by bin averaging, upon assuming statistical axisymmetry of the jet. Mean and fluctuating axial velocity components in the jet near-field are compared with reference results obtained from planar PIV at higher seeding density.