Building HVAC Scheduling Using Reinforcement Learning via Neural Network Based Model Approximation

TL;DR

This paper introduces a model-based reinforcement learning method using neural network approximations and MPC for HVAC scheduling, achieving significant energy savings and improved training efficiency in building management.

Contribution

It proposes a neural network-based model predictive control approach for HVAC scheduling that enhances safety and reduces training time compared to model-free methods.

Findings

Achieves 17.1% to 21.8% energy savings.

Reduces training steps by 10x compared to model-free RL.

Trajectory deviation from ground truth is below 20%.

Abstract

Buildings sector is one of the major consumers of energy in the United States. The buildings HVAC (Heating, Ventilation, and Air Conditioning) systems, whose functionality is to maintain thermal comfort and indoor air quality (IAQ), account for almost half of the energy consumed by the buildings. Thus, intelligent scheduling of the building HVAC system has the potential for tremendous energy and cost savings while ensuring that the control objectives (thermal comfort, air quality) are satisfied. Recently, several works have focused on model-free deep reinforcement learning based techniques such as Deep Q-Network (DQN). Such methods require extensive interactions with the environment. Thus, they are impractical to implement in real systems due to low sample efficiency. Safety-aware exploration is another challenge in real systems since certain actions at particular states may result in catastrophic outcomes. To address these issues and challenges, we propose a model-based reinforcement learning approach that learns the system dynamics using a neural network. Then, we adopt Model Predictive Control (MPC) using the learned system dynamics to perform control with random-sampling shooting method. To ensure safe exploration, we limit the actions within safe range and the maximum absolute change of actions according to prior knowledge. We evaluate our ideas through simulation using widely adopted EnergyPlus tool on a case study consisting of a two zone data-center. Experiments show that the average deviation of the trajectories sampled from the learned dynamics and the ground truth is below $20\%$. Compared with baseline approaches, we reduce the total energy consumption by $17.1\% \sim 21.8\%$. Compared with model-free reinforcement learning approach, we reduce the required number of training steps to converge by 10x.